Connector Type of Fiber Optic Transceiver
The fiber optic transceiver can be classified into various categories based on their performance characteristics and end-use. Currently 6 primary form-factors of fiber optic transceivers are SFP+, SFP, GBIC, X2, 10G XFP, XENPAK, and QSFP+ for 40Gbps, CFP transceiver for 100Gbps. Commonly transceiver modules have the features of fiber mode, transfer rate, transmission distance, wavelength, and connector type.Fiber Mode
The two basic classifications of fiber mode types are multi-mode and single-mode. Multi-mode fiber transceiver is installed in multi-mode fiber connection for short reach (usually with the nomenclature "SR") and single-mode transceiver module is installed in single-mode fiber connection for long reach (usually with the nomenclature "LR").
Wavelength
Infrared light is used in the transmission of data over fiber optic networks. A wavelength is the measurement of the distance between successive crests in the light wave. Fiber optic transceivers typically transmit data at one of three primary wavelengths: 850nm, 1310nm or 1550nm. Multi-mode fiber is designed to operate at 850nm and 1300nm wavelengths, while single-mode fiber is optimized for 1310nm and 1550nm wavelengths.
Connector Type
Transceiver modules can be classified into different groups based on their connector types. There are four main types of fiber optic connectors used in conjunction with optical transceivers today: SC, LC, MPO, and ST. These connector types generally follow a color code system to differentiate between connectors compatible with single-mode and multi-mode fiber.
| Connector | Description | Form Factors Using |
|---|---|---|
| SC | Subscriber Connector (snap-in connector) | GBIC, X2, XENPAK, some QSFP (40G) and CFP (100G) |
| LC | Lucent Connector (small form-factor version of the SC connector) | SFP, SFP+, XFP |
| MPO | Multi-fiber Push-On (commonly 12 or 24 fibers per) | Some QSFP (40G) and CFP (100G) |
| ST | Straight Tip Connector (bayonet mount connector) | Not used on optical transceivers but popular at optical patch panels |
For the newer QSFP and CFP modules that utilize a MPO connector, there is only a single connector but, as described in the table above, each connector may have 12 or 24 fibers, each of which connect to separate transmitters/receivers within the optical transceiver.
en.OFweek is a famous B2B marketplace, in its optical communication category, the transceivers covering data rate from 155M to 100G, souring the SFP+, SFP, GBIC, X2, XFP, XENPAK, QSFP+, CFP transceiver modules right now!